Model props are artworks in the clothing industry, so they will also be worn and damaged. Learning to maintain them will reduce the wear of model props, and the service life will be relatively longer. Now, please take notes and remember the following four tips for maintaining clothing model props!
1. The model should not be placed in a place where the sun shines directly or the spotlights are too strong. If it is often irradiated, the paint on the model's surface will change color.
2. When placing models and props in the shopping mall, try to place them on the side (that is, places that are not easy to be knocked down or tripped by customers), because some models are fragile products made of glass fiber reinforced plastics. If they fall down, the accessories at each interface position are most likely to fall off, making them unusable.
3. Care must be taken during use. When assembling or disassembling models, each model part should be placed on a soft object as far as possible to avoid damaging or scratching the model props due to too much force. In particular, the edges and corners at the junction of each model part are most likely to collapse and cause gaps.
4. When the model is accidentally soiled, the following methods can be used for cleaning. The surface of the model's props is white paint, depending on whether the model has just been used or has been used for a long time. If you are a white model who has just been used, you can use a clean damp cloth or eraser to gently wipe. When using the eraser, you should pay attention to gently wipe, otherwise, the part you wipe is much brighter than other parts; If it has been used for a long time, you can use a clean wet cloth and a little detergent to clean it, because some white models will turn yellow after being used for too long. When the surface of the model's props is painted with other colors, rubber and detergent are most commonly used. However, there are some stubborn ones that cannot be removed. At this time, consider using universal water for cleaning. Pay attention to the concentration of universal water. If it is too thick, add water to dilute it and then clean it, so as not to wash off all the paint.